Automatic sweeper

Use a rotating brush with a cross linear module ball screw slide table, positioning mechanism, jacking mechanism, etc. to clean the inside of the sagger, and recover the powder. The working cycle is 10-23 seconds/time.

In and out of furnace transplanter

Before entering the furnace, make the saggers neatly arranged in 4 rows, with a gap of 10mm, and use 8 rows of timing belts with the jacking cylinder to enter the replacement warehouse before the furnace at the same speed at the same speed;

The horizontal conveyor roller line and the transfer machine adopt integral frame conveying;

The two (or one) end faces of the frame are the same as the end faces of the independent roller line, that is, the connection mode with the line body is the same.

Ceramic accumulation roller

Connect the conveying equipment of each station to make the kiln cooperate with various transplanting machines to form a closed-loop conveying;

Multiple roller shafts (each roller shaft is equipped with 2 ceramic wheels) drive the rotating roller shaft through a motor to transport the sagger forward.

Ninety-degree turning transfer machine

When the saggar is conveyed at right angles, it is lifted by the timing belt and the cylinder;

The design of the transfer machine adopts an integral right-angle frame and contains 2 sets of ceramic accumulation roller conveyor lines;

The two end faces of the frame are the same as the end faces of the roller line, that is, the connection method is the same.

Automatic double-speed chain conveyor line

Connect the conveying equipment of each station to make the kiln cooperate with various transplanting machines to form a closed-loop conveying;

The double-speed chain conveyor line conveys the sagger forward through the motor-driven rotary conveying method; the double-speed chain conveyor line has an adjustable accumulation function, which has obvious advantages compared with traditional conveying. There is no forced friction between the ceramic wheel and the sagger, which protects the sagger.

Fully automatic single and double stage bowl filling machine

Use screw conveyor to transport powder to the sagger, with weighing sensor, blocking positioning mechanism, jacking mechanism, dustproof mechanism, etc. to achieve quantitative weighing;

The weighing weight can be set on the touch screen, the weighing range is 01~100Kg, the accuracy is ±5-25g according to the parameter setting, and the speed is 15-28 seconds/time.

Automatic pouring machine

Use positioning mechanism, clamping mechanism, rotating mechanism and realize 180℃ pouring; pouring speed is 10-30S each time, the speed can be adjusted; driving mechanism: high-precision motor, two-way stroke cylinder; internally made of PA material; using positioning mechanism , Double-stroke lifting mechanism, clamping mechanism, and the use of the shape of the lower open bowl to realize the stacking of saggers and save more space.

Grid/Jack Machine

Use pin (insert block) components to cooperate with positioning mechanism, jacking mechanism, etc. to realize material with holes or grooves, which is beneficial to the sintering process; directly install on the line body to make full use of space. The mold can be diversified: pin punching, cutting, etc. .

Automatic all-in-one machine

The bowl-loading, vibrating, flat-jack, and bowl-stacking integrated machine is connected to each station by a ceramic roller conveyor line, so that the kiln and various transfer machines cooperate to form a closed-loop transportation.